Spice World! » Knitting

Maker Faire UK 2010

cyberspice — Thu, 22 Apr 2010 01:14:33 +0000

So in the middle of March I was panicking about whether I would get everything ready in time for Maker Faire UK. Like last year Maker Faire UK was held at the Life Science’s Centre in Newcastle-upon-Tyne as part of the Science Week there. Unlike last year, this year I had been accepted as an exhibitor and was going to display a variety of projects, so I took the Friday as vacation for final preparation and I needed it.

The theme of my exhibit was the mix of tech and craft. Basically it was a collection of projects I had been working on and thought were good enough to display.

‘Programmable’ Earrings

Recently I started doing bead work, making necklaces and earrings and so on. One day when doing some electronics I realised that components would make awesome earrings. I then thought if you’re using components why not make them actually do something. So I prototyped up a design based around an ATTiny part that I thought would work and thought about scaling the design down to something that could actually be worn on the ears.

This turned out to be a bit of a learning curve. The only way I could do it was to resort to surface mount. Something I had never done before. Also I needed to product the PCBs professionally for the project to have any chance of working. Also something I had never done before. So this required me to learn to use a PCB CAD package. Yet more learning curve. And to add to the pressure because of the turn-round time on the PCBs I had one chance to get it right. I waited with baited breath for them to return from Olimex.

There were two issues with the board. The holes for the LED leads were too narrow. I fixed that with a pillar drill. Also the outline for the battery (which is mounted on the bottom of the board) was printed on the top of the board. That was my mistake since I created the batter holder component in the CAD package. I fixed that with judicious use of a craft knife to scrape away the print. I soldered everything up, programmed the micro-controller, and they worked.

They are light and wearable. The software carries out PWM on three RGB channels varying the colour of the LED. The colour pattern and speed of flashing changes with light level. The size is limited by the clearance of the LED and LDR leads and the battery. They were very popular and I may have to make more due to interest.

Knitted Cthulhu

This was a fun little project. I found a pattern for a knitted Cthulhu on the web. Unfortunately I’ve mislaid the link right now but I do want to acknowledge the author so when I’ve found it I will update this post. The knit was fun in itself and included knitting in the round, adding and removing stitches, and i-cord.

However because I am me I wanted to stuff electronics in to it. So rather than using beads for eyes I used LEDs. I built a small circuit on strip board based around the ATTiny part which drove the two LEDs and used a mechanical tilt switch as an input. Additional output was via a piezo-electric sounder. The tilt switch was mounted upside down so that it was normally off. However shaking the cthulhu would activate it.

A software algorithm carried out key de-bounce and counts the number of ‘shakes’ within a set time and drives a state machine that flashes the eyes and makes noises dependent upon the speed of the shaking. The children loved my cthulhu.

Beebthernet

A while I go i wrote a blog post about my Beebthernet project. Well since I was getting PCBs made anyway I thought I’d use the space space available to get a PCB for the parallel port/SPI version of the Beebthernet circuit.

I was hoping to have written a twitter client in time for Makefaire but all I’d gotten was basic sockets working. However having a stand with a BBC Microcomputer connected to a flat screen monitor and a network was interesting to many people who attended the fair. In many cases parents would tell their children how the BBC micro was the computer they used at school.

Temperature Sensing Hat

This project turned out to be a work in progress so I took it anyway together with some tools in order to continue to work on the electronics. The hat itself is based upon a design in Stitch ‘N Bitch which is an excellent book. It is the sequinned hat but without sequins however unlike the hat in the book mine has a long i-cord ‘tail’ from the top of the hat than hangs down the back. The tail houses a temperature sensor in the end.

The rest of the hat is intended to be covered in small LED beads but they were not finished for Makerfaire. The beads are an idea from Leah Buechley and are constructed from a surface mount LED and two beading crimp rings solder to each terminal. I chose gold and silver rings so that I could tell the polarity. They are awfully small and fiddly to make.

My exhibits seemed to go down well with the public. I ended up being interviewed by the BBC for their Pods and Blogs show on Radio 5 Live. And then I was filmed by the reporter’s colleague for a YouTube project.

I have to admit I don’t look my best since I was stressed and this was early on the Saturday not long after the faire opened and I hod gotten up early that morning to drive up to the event and set up my things.

The faire was very enjoyable and it would be great to be back there again next year. Hopefully I would be more organised this time. There were people I knew there but many more I didn’t and I made some new friends among the exhibitors. I would like to thank Molly and Kat who were my support team and who took over talking to the public when I needed a break, food, etc. I did get a chance to look around the faire and I have to admit the stars of the show were the musical tesla coils they were both awesome and loud!

Ribbed Scarf and Beads

cyberspice — Thu, 24 Dec 2009 14:09:18 +0000

For those who want to know, this is how the ribbed scarf turned out!

I have given it to one of my my sister’s as a gift. For the other sister I made her some beaded jewelery.

iPhone cosy

cyberspice — Tue, 01 Dec 2009 15:42:43 +0000

A short while ago I went down with the ‘flu’. Usually in these cases the best thing for me to do is rest and sleep. But eventually I get bored so I have to find something to do. So this time I sat in a recliner, watching a movie, whilst teaching myself to Purl. I wanted a project I could finish in an evening to use my new found skill so I modified the “Cricket’s Cell Phone Cozy” design and learnt to do stockinette stitch and add and remove stitches in rows. Below is the result.

It has a couple of things I could improve on. I put the cutout for the headphone cable on the wrong side and you have to take it out to charge. The next one will have a button hole type slot in the bottom for the charging cable.

Knowing Purl has meant I can do ribbing so I’ve started knitting a ribbed scarf out of some great multicolour yarn.

First scarf finished!

cyberspice — Mon, 16 Nov 2009 13:11:46 +0000

I finished my first knitting project in a long long while. Its a simple knit scarf of 24 knit stitches per row in Rico Design “Roxy” yarn (73% acrylic/27% new wool – 50gm/60m – Colour violet 007). It took four balls to get a decent length using 8mm needles.

Finishing it off turned out to be problematic. I didn’t realise how much yarn I would need to bind off and ran out half way through. This meant I had to undo the bind off which wasn’t easy and I dropped at least one stitch doing it. I then had to unknit a few rows to give me the length needed and to be able to correct the dropped stitch. Whilst doing this the yarn broke. I ended up having to lay the piece flat, take it off the needle, pull off several rows and then carefully rethread the needle. I succeeded though and here it is.

Being crafty

cyberspice — Tue, 03 Nov 2009 00:37:44 +0000

Knitting was once a necessity if you were anything other than very rich. My grandmothers’ generation all could knit. My mother can knit but many of her contemporaries do not. Knitting when out of favour especially amongst feminists who saw it as “women’s work” (even though there is a rich history of male knitters) and everything they were trying to fight. But a new generation of feminists have emerged, many of them geeky women, and they are reclaiming knitting. These third wave feminist knitters think that rejecting the craft devalues the work of past women and rather than rejecting it we should reject the opinion that knitting is in any way a second class activity.

When I was very young my mother taught me to knit. I knitted a small red stuffed bear which my mother probably has stored away somewhere. I haven’t really knitted since then, until now.

A couple of months ago I decided to give it another try so I ordered both Stitch’n'Bitch and The Happy Hooker from Amazon. These books, by the same author Debbie Stoller, are partly teach-you-self books and partly pattern books for knitting and crochet respectively. The approach the crafts in a fun way working through from the basics to advanced techniques with instructions and diagrams. The second halves of the books comprise funky patterns, such as hoodies, alien scarves, fingerless gloves and so on. These patterns are devised by young knitters and crocheters, by a new generation for the new generation. They are an excellent buy and thoroughly recommended.

My current project is a beginners scarf. Knitting is like cycling you never really forget how to do it and its amazing how quickly you pick it back up again. I find knitting relaxing and carry wool and needles everywhere. I am learning slowly but it is now something I will stick with. I’ve already had a request for a scarf from my sister and with Christmas two months away there are bound to be a couple of gifts I could make for people. I haven’t really tried crocheting yet so that’s my next challenge.